PRODUCT LIST

Guangzhou Shiyang Audio Equipment Co., Ltd. (formerly Longda Audio)
contact number:
020-39961785
020-80548919
Mr. Meng: 13570481619
Miss Meng: 18924295929
Mr. Wang: 18824572533
Fax number: 020-80548919
Address: Panyu District, Guangzhou City Shiji Longbang Industrial Zone 3

DETAIL INFO
YOU ARE HERE:HOME > DETAIL INFO
The basic concept of gates: appreciation acoustics

Release Date:[2013/8/31 11:27:10]    Total read [1262] Times

Each instrument has its unique timbre, frequency spectrum, in order to improve the ability of music appreciation, must do more listening, which play a piece of music, the tone of the speaker system release and the actual instruments of what are the different timbre, how much deviation, etc. Contrast for the hearing, first should get to know some of the auditory electroacoustics noun concept, characteristics and main technical parameters of audio equipment.


A. Some electroacoustics noun explanation


1. Pure tone: it has two meanings: (1) refers to the sound of instantaneous pressure intercropping sine change at any time; (2) with a clear single tone of voice.


2. Pitch: refers to the complex sound in the lowest frequency component.


Overtones: composite sound frequency is higher than the pitch composition, its frequency can be a multiple of that of the pitch frequency, also can not. All kinds of instruments with different playing method can generate the number and strength of different harmonic components, even the same pitch can have different sound.


4. Sound waves: elastic medium to spread a kind of mechanical wave, originated from the vibration of the vocal body. Sonic range of 20 hz - 20 KHZ, higher than 20 KHZ sound waves of ultrasonic frequency, frequency of less than 20 hz for sound waves, ultrasonic and wares generally cannot cause hearing, only the frequency between the two sound waves to hear, we can hear the sound waves called sonic or audible sound.


2. The main technical indicators affecting the sound quality, sound


1. The frequency range (Hz) : power amplifier distortion and rated output power under the condition of working frequency band width, namely the minimum working frequency power amplifier to the highest working frequency range.


2. The frequency response (unit: dB dB) : the output of the power amplifier gain ascend along with the change of the input signal frequency attenuation and phase lag or change from the input signal frequency. Examination is the index of the most important quality of a power amplifier, the decibel &#118alue is smaller, flat frequency response curve of the power amplifier, the smaller the distortion, the degree of reduction and reappearance of signal and the stronger ability.


A good stereo equipment, except to the phonological representation of various Musical Instruments, but also the location of various instruments, distance, the scenes reappear. No matter what kind of color or personal preference, if played out of tone with the original instruments sound auditory differences, can't call yourself a good equipment. Hi-fi (Hi - Fi) is the true meaning of high degree of reduction. If your audio equipment can not restore the original instrument sound lasting appeal, then it is not hi-fi equipment. When we use subjective judgment hearing a sound equipment, should fully pay attention to this point, do not affect the correct judgment due to personal preference and differential ability enhancement.


5. Sound field: refers to the media there are sound waves in the area. Different sound source and the environment can form different sound field.


6. Loudness: also called the "volume", a feeling of volume to the human ear. Depending on the sound intensity, frequency and waveform.


7. Colors: also called "tone color", mainly by the amount of harmonics and each is determined by the relative amplitude of the harmonics.

【 Font:Big Middle Small 】【Printing this page】 【Back】【Top】【Close
Copyright © Guangzhou Shiyang Audio Equipment Co., Ltd. (formerly Longda Audio) All Rights Reserved.   INXUN.COM.CN